Technical

Dosing Pump - Universal +
Universal Dosing Pump with QDos Pumps
Dosing Pump - Manual
Dosing Pumps - Remote
PROFIBUS Dosing Pump

Universal +

  • Flow rates 0.1-2000 ml/min at up to 7bar (100psi) RMS pressure
  • Flow accuracy of ±1% and flow repeatability of ±0.5%
  • 4–20mA input and output with alarm output
  • Configurable 4-20mA input
  • Manual, analogue or contact mode functionality
  • Universal

  • Flow rates 0.1-2000 ml/min at up to 7bar (100psi) RMS pressure
  • The Universal pump offers the same functionality as the Universal+ but with a fixed range 4-20mA input and no 4-20mA output.
  • Manual

  • Flow rates 0.1-2000 ml/min at up to 7bar (100psi) RMS pressure
  • Flow accuracy of ±1% and repeatability of ±0.5%
  • Manual speed control
  • Remote

  • Flow rates 0.1-2000 ml/min at up to 7bar (100psi) RMS pressure
  • Remote control for absolute process security
  • 4-20mA input and alarm output
  • LED indication of power, run status, alarm and pumphead failure
  • PROFIBUS

  • Flow rates 0.1-2000 ml/min at up to 7bar (100psi) RMS pressure
  • Manual and PROFIBUS control
  • Intelligent device capable of diagnostic feedback
  • PROFIBUS DP V0 – real time communication for secure and flexible processes
  • Bus speed 9.6 up to 1,500 kb/s
  • Qdos 30 Datasheets

    Qdos 60 Datasheets

    Qdos 120 Datasheets

    Pump range

    Simplicity in installation, operation and maintenance were key considerations when designing the Qdos range of pumps.

    An intuitive menu offers advanced control features including:

  • Fluid level monitoring
  • Fluid recovery
  • Line priming
  • Flow calibration
  • The 3.5" TFT colour display provides instant pump status and can be configured to display in 7 different languages.

    Qdos pumps can be ordered with the ReNu pumphead mounted on the left or right of the pump. The keypad, display and input/output connections are readily accessible for easy operation and maintenance. All models are IP66 rated for use in washdown environments.

    Pump range

    Technical Data

    Functionality

    Universal +

    Universal

    Manual

    Remote

    PROFIBUS

    Operational modes
    Manual Bullet Bullet Bullet   Bullet
    Contact Bullet Bullet      
    4-20mA Bullet Bullet    
    Fluid recovery Bullet Bullet Bullet Bullet Bullet
    Fault reporting Bullet Bullet Bullet Bullet Bullet
    PROFIBUS control and diagnostics          Bullet

     

    Manual control
    Numerical flow display Bullet Bullet Bullet   Bullet
    Numerical speed display Bullet Bullet Bullet   Bullet
    Numerical percentage of max speed display Bullet Bullet Bullet   Bullet
    Fluid level monitor Bullet Bullet Bullet   Bullet
    Max (prime) Bullet Bullet Bullet   Bullet
    Auto restart Bullet Bullet Bullet   Bullet
    Pumphead failure alarm
    Bullet Bullet Bullet   Bullet

     

    Remote control
    4-20mA input Bullet Bullet   Bullet  
    4-20mA input two point calibration Bullet        
    4-20mA output Bullet     Bullet  
    Contact input (pulse/batch) Bullet Bullet      
    Run Stop input Bullet Bullet   Bullet  
    Run status output Bullet Bullet   Bullet  
    Alarm output Bullet Bullet   Bullet  
    Remote fluid recovery Bullet Bullet   Bullet  
    Optional 24V or 110V industrial logic Bullet Bullet      

     

    LED Pump status icons
    Pump status       Bullet  
    4-20mA status       Bullet  
    Fault       Bullet  

     

    Security
    Keypad lock Bullet Bullet Bullet   Bullet
    PIN lock Bullet Bullet Bullet   Bullet

    Performance data

    Typical flow rates (metric up to 7 bar)

    Model Speed (rpm) Flow (ml/min)*
    Qdos 30 Qdos 60 Qdos 120
    Universal+, Universal, Manual, PROFIBUS 0.006-125 0.1 to 500 0.1 – 1000 0.1-2000
    Remote 0.078-125 0.3 – 500 0.3 to 1000 1.25-2000

    Typical flow rates (imperial up to 100 psi)

    Model Speed (rpm) Flow (US G/hr)*
    Qdos 30 Qdos 60 Qdos 120
    Universal+, Universal, Manual, PROFIBUS 0.006-125 0.001 – 7.93 0.001 – 15.85 0.001-31.7
    Remote 0.078 - 125 0.005 – 7.93 0.005 – 15.85 0.02-31.7
    Model A B C D E* F G H I
    Qdos 30 234mm (9.2”) 214mm (8.4”) 82.5mm (3.2”) 233mm (9.2”) 43mm (1.7”) 173mm (6.8”) 40mm (1.6”) 140mm (5.5”) 10mm (0.4”)
    Qdos 60 / Qdos 120 234mm (9.2”) 214mm (8.4”) 118mm (4.6”) 266mm (10.5”) 43mm (1.7”) 173mm (6.8”) 40mm (1.6”) 140mm (5.5”) 10mm (0.4”)

    * Optional relay module

    Technical Specification

    Qdos Universal and Universal+

    Ingress rating IP66 / NEMA 4X
    Enclosure Watertight / dustproof
    Suitability Dry light-industrial environments
    Humidity Non-condensing 5% to 95%
    Temperature 5C to 45C (41F to 113F) Santoprene
    5C to 40C (41F to 104F) SEBs
    Pump weight Qdos 30: 5.0kg (11lb 2oz)
    Qdos 60: 5.7kg (12lb 9oz)
    Qdos 120: 5.7kg (12lb 9oz)
    Control ratio Up to 10000:1
    Noise < 70dB(A) at 1m
    Standard CE, UL 61010-1, CSA C22.2#61010-1, NSF 61, C Tick, Argentina Safety Mark
    Power supply Switch mode power supply

    Materials of Construction

    Component

    Material

    Keypad Polyester
    Drive casework 20% Glass filled PPE/ PS
    Drive shaft Steel 440C
    Pumphead enclosure Qdos 30 pumphead enclosure 40% Glass filled PPS
    Qdos 60 pumphead enclosure 30% Glass filled PPE/PS
    Qdos 120 pumphead enclosure 30% Glass filled PPE/PS
    Rotor Glass filled nylon
    Rotor bearings Steel
    Tube† Santoprene (max 7 bar, 100 psi)
    SEBS (max 4 bar, 60 psi)
    Hydraulic connectors Polypropylene (as standard)
    PVDF (optional)
    Pumphead Hydraulic Connectors Polypropolene (Santoprene pumphead)
    PVDF (SEBS pumphead)
    Lubricant* PFPE based
    Glycerol based (optional lubricant Qdos 30)

    *The ReNu pumphead contains lubricant. It is the user’s responsibility to comply with local health and safety regulations, including ensuring chemical compatibility between the lubricant and the duty fluid before use. For guidance refer to Chemical Compatibility.